Motorola BSR 2000 manual Ssh load-host-key-files, Nvram

Release 1.0 Secure Shell Server Commands

ssh load-host-key-files

The ssh load-host-key-filescommand specifies a new private or public hostkey authentication file. The default hostkey authentication file names are “hostkey and hostkey.pub”. These two files must exist and must be valid key files. Use the UNIX ssh-keygen2tool to generate a new hostkey authentication file.

Note: If the hostkey authentication files are invalid, SSH will not run.

Group Access

ISP

Command Mode

Global Configuration

Command Line Usage

ssh load-host-key-files {nvram:} {<filename>} no ssh load-host-key-files

Command Syntax

nvram:	specifies Non-volatile Random Access
	Memory (NVRAM) as the location of the
	hostkey authentication file
filename	filename of the hostkey authentication file
	stored in Flash or NVRAM

Command Default

hostkey = hostkey.pub

526363-001-00 Rev. B MGBI 15-11