Release 1.0 | IP Commands |
|
|
show host authorization cpe
The show host authorization cpe command is used to display the dynamic or static ARP entries for CPEs only. The following screen output is displayed:
Type | Host IP Address | Host MAC Address |
Dynamic | 150.31.43.3 | 0008.0e72.bf72 |
Dynamic | 150.31.43.2 | 0008.0e73.1dbc |
Group Access
All
Command Mode
All modes except User EXEC
Command Line Usage
show host authorization cpe {leased static} [ {begin exclude include} {<WORD>} [ {count
show host authorization cpe {leased static} [ {count
Command Syntax
leased | display dynamically configured host |
| authorization entries |
static | display statically configured host |
| authorization entries |
turns on output modifiers (filters) | |
begin | filter for output that begins with the |
| specified string |
exclude | filter for output that excludes the |
| specified string |
include | filter for output that includes the |
| specified string |
MGBI |
