Release 1.0

System Administration Commands

 

 

tacacs-server host

The tacacs-server host command is used to specify and configure individual TACACS+ servers. The command can also be used to configure multiple TACACS+ servers. The TACACS+ client will contact the servers in the order in which they are specified.The no tacacs-server host command removes a TACACS+ server from the list.

Note: Since the key, port, retry, and timeout parameters specified with the tacacs-server host command override any global settings made by the tacacs-server key, tacacs-server port, tacacs-server retry, and tacacs-server timeout commands, the tacacs-server host command can be used to enhance network security by uniquely configuring individual TACACS+ servers.

Group Access

All

Command Mode

Global Configuration

Command Line Usage

tacacs-server host {<hostname> <A.B.C.D>} [key <WORD> port <0-65535>retry <0-100> single-connection timeout <1-1000>]

no tacacs-server host [<hostname> <A.B.C.D>]

Command Syntax

key WORD

specifies an authentication and encryption

 

key - specifying a key with this command

 

overrides the global key specified by the

 

tacacs-server key command for this

 

TACACS+ server only

port 0-65535

specifies a server port number - this value

 

overrides the global port number value set

 

with the tacacs-server port command for this

 

TACACS+ server only

526363-001-00 Rev. B

MGBI

1-153

Page 189
Image 189
Motorola BSR 2000 manual Tacacs-server host, Tacacs-server key command for this