BSR 2000 Command Reference Guide

Release 1.0

 

 

cable modem qos dsa

The cable modem qos dsa command triggers a dynamic service change (DSC) initiated by the CMTS for a specified cable modem. The DSC is in a binary file that conforms to the DOCSIS cable modem configuration file format. This configuration file is saved in the TFTP "boot" directory on a TFTP server with a known IP address. The current implementation has only the change of service based on service-flow (not the flow classifier, nor the payload-header-suppression).

Note: The definition of the dynamic service is defined in a binary file that conforms to the DOCSIS 1.1 cable modem’s configuration file format. This configuration file is saved in the TFTP "boot" directory on a TFTP server with known IP address.

Warning: This command should be used with extreme caution as the dynamic service definition in the configuration file will be overwritten.

Group Access

MSO

Command Mode

Privileged EXEC

Command Line Usage

cable modem {<mac> <prefix>} qos dsa <prefix> <string>

Command Syntax

mac

The CM Dynamic Service Addition MAC

 

address of the specified cable modem.

prefix

Specified cable modem IP address to create or

 

delete a SID.

prefix

IP address of TFTP server.

string

File name to be configured.

11-42

MGBI

526363-001-00 Rev. B

Page 588
Image 588
Motorola BSR 2000 manual Cable modem qos dsa