BSR 2000 Command Reference Guide | Release 1.0 |
|
|
timers spf
The timers spf command configures the amount of time between OSPF topology change receipt and when it starts a shortest path first (SPF) calculation. This includes the hold time between two consecutive SPF calculations. The no timers spf command changes the configuration of the amount of time between OSPF topology changes receipt and when it starts an SPF calculation and returns it to the default value.
Use the timers spf command to set the delay time and hold time to change routing to a faster path.
Group Access
ISP
Command Mode
Router Configuration
Command Line Usage
timers spf <0-65535> <0-65535> no timers spf <0-65535> <0-65535>
Command Syntax
time in seconds between receipt and SPF | |
minimum time in seconds between two | |
| consecutive SPF calculations |
Command Default
SPF delay = 5 seconds
SPF hold time = 10 seconds
MGBI |
