BSR 2000 Command Reference Guide

Release 1.0

 

 

neighbor soft-reconfiguration inbound

The neighbor soft-reconfiguration inbound command starts the storage of incoming updates without any modification. The no neighbor soft-reconfiguration inbound command stops this storage and releases the memory used for them.

Use the neighbor soft-reconfiguration inbound command to start update story required to enable inbound software configuration with the clear ip bgp soft [in] command. Outbound BGP soft-reconfiguration does not need inbound software configuration.

Outbound BGP soft-reconfiguration does not need inbound software configuration.

Note: When the neighbor soft-reconfiguration inbound command is issued, the peer will first be disabled and then enabled again. The no form of this command doesn't bring the peer down.

Group Access

ISP

Command Mode

Router Configuration

Command Line Usage

neighbor {<A.B.C.D> <WORD>} soft-reconfiguration inbound no neighbor {<A.B.C.D> <WORD>} soft-reconfiguration inbound

Command Syntax

A.B.C.D

neighbor IP address

WORD

name of BGP peer group

inbound

specific inbound update

Command Default

No storage

12-48

MGBI

526363-001-00 Rev. B

Page 866
Image 866
Motorola BSR 2000 manual Neighbor soft-reconfiguration inbound, Inbound