Cisco Systems OL-4580-01 Showing the Configured Advertised ASE Routes, Field, Description, 3-37

Chapter 3 Configuring Open Shortest Path First (OSPF)

Showing OSPF Information

Showing the Configured Advertised ASE Routes

To show the configuration of ASE routes into OSPF, enter:

#show ospf advertise

To show the configuration of ASE routes into OSPF for a specific host, include the IP address or host and the subnet mask. Enter the address in dotted-decimal format (for example, 192.168.11.1) or mnemonic host-name format (for example, myname.mydomain.com). Enter the mask either:

•As a prefix length in CIDR bit-count notation (for example, /24). Do not enter a space to separate the IP address from the prefix length.

•In dotted-decimal notation (for example, 255.255.255.0).

For example:

#show ospf advertise 192.168.11.1/24

Table 3-8describes the fields in the show ospf advertise command output.

Table 3-8 Field Descriptions for the show ospf advertise Command

Field	Description
Prefix	The IP address for the route. For the CSS, the prefix is
	predominately VIP addresses.
Prefix Length	The prefix length for the IP address.
Metric	The network cost for the route. The range is from 1 to
	16777215. The default is 1.
Type	The ASE type for the route. By default, the ASE type is ASE
	type2, which is the external cost to reach the route. ASE type1
	combines the external and internal costs.
Tag	The 32-bit tag value to advertise the route. The value is not used
	by OSPF.

	Cisco Content Services Switch Routing and Bridging Configuration Guide
OL-4580-01		3-37