Cisco Systems OL-4580-01 manual Configuring Equal-Cost RIP Routes, Config# no rip equal-cost

Chapter 5 Configuring Routing Information Protocol

Configuring Equal-Cost RIP Routes

The options and variables for this command are as follows:

•firewall - Advertises firewall routes through RIP.

•local - Advertises local routes (interfaces not running RIP).

•static - Advertises static routes configured for the Ethernet interface ports.

•ospf - Advertises OSPF routes through RIP.

•metric - (Optional) Metric to use when advertising this route. Enter a number from 1 to 15. The default is 1.

For example:

(config)# rip redistribute static 3

To stop advertising routes from other protocols through RIP, use either the local, static, or firewall option.

The following commands stop advertising static routes:

(config)# no rip redistribute firewall (config)# no rip redistribute local (config)# no rip redistribute static (config)# no rip redistribute ospf

Configuring Equal-Cost RIP Routes

To set the maximum number of routes that RIP can insert into the routing table., use the rip equal-costcommand Enter a number from 1 to 15. The default is 1. For example:

(config)# rip equal-cost 4

To reset the number of routes to the default value of 1, enter:

(config)# no rip equal-cost

	Cisco Content Services Switch Routing and Bridging Configuration Guide
5-4	OL-4580-01