Cisco Systems OL-4580-01 Showing the Redistribution Policy, Firewall Field, Description, 3-38

Chapter 3 Configuring Open Shortest Path First (OSPF)

Showing OSPF Information

Showing the Redistribution Policy

To show the configured redistribution policy into OSPF, enter:

#show ospf redistribute

Table 3-9describes the fields in the show ospf redistribute command output.

Table 3-9 Field Descriptions for the show ospf redistribute

Command

Static, RIP, Local, or
Firewall Field	Description
Routes	Indicates whether the redistribution of static, RIP, local
Redistribution	or firewall routes is enabled or disabled. If route
	redistribution is enabled, the configured metric, type, and
	tag fields are displayed.
Route Metric	The external cost for the route. The cost can range from
(displayed when	1 to 16777215. The default is 1.
redistribution is
enabled)
Route Type	The ASE type, either ASE Type1 or ASE Type2. By
(displayed when	default, the type is aseType2. The difference between
redistribution is	type1 and type2 is how the cost is calculated. For a type 2
enabled)	ASE, only the external cost (metric) is used when
	comparing multiple paths to the same destination. For
	type1 ASE, the combination of the external cost and the
	cost to reach the ASBR is used.
Route Tag	The 32-bit tag value to advertise the external route. The
(displayed when	route tag value is not used by the OSPF protocol itself. It
redistribution is	is used to communicate information between AS
enabled)	boundary routers.

	Cisco Content Services Switch Routing and Bridging Configuration Guide
3-38	OL-4580-01