Cisco Systems OL-4580-01 manual Field, Description, 3-34, # show ospf lsdb

Chapter 3 Configuring Open Shortest Path First (OSPF)

Showing OSPF Information

To show the entire database, enter:

#show ospf lsdb

Table 3-6describes the fields in the show ospf lsdb command output.

Table 3-6 Field Descriptions for the show ospf lsdb Command

Field	Description
Area	The ID for the area.
Type	The link-state type. The types are as follows:
	• ASB-Summary for summary LSAs originated by
	ABRs. The LSAs describe routes to ASBRs.
	• ASE for AS-external LSAs that describe routes to
	destinations external to the autonomous system.
	• Network for the network LSAs that describe the set of
	routers attached to the network.
	• Router for router LSAs that describe the collected
	states of the router interfaces.
	• Summary-Net for summary LSAs originated by ABRs.
	The LSAs describe routes to networks.
Link State ID	This field identifies the piece of the routing domain that is
	being described by the LSA. Depending on the link-state
	type, the Link State ID has following values:
	• For the ASB-Summary type, the ID is the router ID of
	the ASBR.
	• For the ASE type, the ID is the destination network IP
	address.
	• For Network type, the ID is the IP interface address of
	the network designated router.
	• For Router type, the ID is the originating router’s
	Router ID.
	• For Summary-Net type, the ID is the destination
	network IP address.

	Cisco Content Services Switch Routing and Bridging Configuration Guide
3-34	OL-4580-01