Cisco Systems OL-4580-01 manual Advertising a Default ASE Route, Config# ospf default

Chapter 3 Configuring Open Shortest Path First (OSPF)

Configuring OSPF on the CSS

!************************** SERVICE **************************

service c100

ip address 1.1.1.100

!IP address for critical service active

service s1

ip address 2.1.1.1

!IP address for service s1 keepalive method get keepalive type http active

service s2

ip address 2.1.1.2 keepalive method get keepalive type http active

!*************************** OWNER ***************************

owner admin1

content r1

add service s1 add service s2

vip address 1.1.1.10

!redundant VIP equals content VIP

active

Advertising a Default ASE Route

Routers use default routes when no additional routes exist to a particular AS external destination. By default, an ASBR does not generate a default route into the OSPF routing domain. Use the ospf default command to force the CSS to generate a default ASE route and advertise the route through OSPF.

Before you enter the ospf default command, configure the CSS as an ASBR. For more information, see the “Configuring the CSS as an Autonomous System Boundary Router” section.

For example:

(config)# ospf default

	Cisco Content Services Switch Routing and Bridging Configuration Guide
3-20	OL-4580-01