Cisco Systems OL-4580-01 manual # clear statistics

Chapter 1 Configuring Interfaces and Circuits

Configuring Interfaces

Table 1-8 Field Descriptions for the show mibii Command (continued)

Field	Description
Last Change	The value of sysUpTime at the time the interface entered its
	current operational state. If the state has not changed since
	the time the CSS came up, the sysUptime is when the port
	was initialized.
Operational	The current operational state of the interface (Up, Down, or
	Testing). The Testing state indicates no operational packets
	can be passed.
Speed	An estimate of the interface's current bandwidth, in bits per
	second. For interfaces that do not vary in bandwidth or for
	those where no accurate estimation can be made, this object
	contains the nominal bandwidth.
Queue Len	The length of the output packet queue (in packets).
Out Octets	The total number of octets transmitted out of the interface,
	including framing characters.
Out Unicast	The total number of packets that higher-level protocols
	requested be transmitted to a subnetwork-unicast address,
	including those packets that were discarded or not sent.
Out Multicast	The total number of packets that higher-level protocols
	requested be transmitted to a non-unicast (for example, a
	subnetwork-broadcast or subnetwork-multicast) address,
	including those packets that were discarded or not sent.
Out Errors	The number of outbound packets that could not be
	transmitted because of errors.
Out Discards	The number of outbound packets that were chosen to be
	discarded even though no errors had been detected to prevent
	their being transmitted. One possible reason for discarding
	such a packet could be to free up buffer space.

To clear interface statistics, use the clear statistics command in SuperUser mode. For example:

#clear statistics

	Cisco Content Services Switch Routing and Bridging Configuration Guide
1-26	OL-4580-01