Cisco Systems OL-4580-01 manual Showing Port Fast Information, Config# bridge bpdu-guard disabled

Chapter 1 Configuring Interfaces and Circuits

Configuring Interfaces

To disable BPDU guard, use the global configuration bridge bpdu-guard

disabled command:

(config)# bridge bpdu-guard disabled

Showing Port Fast Information

To display whether Port Fast is enabled or disabled on all interfaces, use the show bridge port-fastcommand. This command is available in all modes. This command also displays whether the BPDU guard feature is enabled or disabled on the CSS, and the state of the interfaces.

Table 1-2describes the fields in the show bridge port-fastcommand output.

Table 1-2 Field Description for the show bridge port-fast

Command

Field	Description
BPDU guard is state	The state of the BPDU guard feature on the CSS:
on this switch.	Enabled or Disabled.
Name	The number of the module slot and interface.
IfIndex	The interface index number.
Type	The type of interface.
	• fe indicates a Fast Ethernet interface.
	• ge indicates a Gigabit Ethernet interface.
Oper	The operational state of the interface: Up or Down.
Admin	The administration state: Enable or Down.
PortFast State	Indicates whether Port Fast is enabled or disabled on the
	interface.

	Cisco Content Services Switch Routing and Bridging Configuration Guide
1-18	OL-4580-01