Cisco Systems OL-4580-01 manual Field, Description, 1-28

Chapter 1 Configuring Interfaces and Circuits

Configuring Interfaces

Table 1-9 Field Descriptions for the show ether-errors Command (continued)

Field	Description
Single Collision	The number of successfully transmitted frames on the
	interface for transmissions that were inhibited by exactly
	one collision.
Multiple	The number of successfully transmitted frames on the
Collisions	interface for transmissions that were inhibited by more than
	one collision.
SQE Test	The number of times that the SQE TEST ERROR message
	is generated.
Deferred Tx	The number of frames for which the first transmission
	attempt on the interface is delayed because the medium is
	busy.
	The count represented by an instance of this object does not
	include frames involved in collisions.
Internal Rx Errors	The number of frames for which reception on the interface
	failed due to an internal MAC sublayer receive error.
Frame too Long	The number of frames received on the interface that
	exceeded the maximum permitted frame size.
Carrier Sense	The number of times that the carrier sense condition was
Errors	lost or never asserted when attempting to transmit a frame
	on the interface.
Internal Tx Errors	The number of frames for which transmission on the
	interface failed due to an internal MAC sublayer transmit
	error.
Excessive	The number of frames for which transmission on the
Collisions	interface failed due to excessive collisions.
Late Collisions	The number of times that a collision is detected on the
	interface later than 512 bit-times in to the transmission of a
	packet.

	Cisco Content Services Switch Routing and Bridging Configuration Guide
1-28	OL-4580-01