Cisco Systems OL-4580-01 manual Showing Circuits, To list an individual circuit, enter

Chapter 1 Configuring Interfaces and Circuits

Configuring Circuits

Showing Circuits

Use the show circuits command to show circuit information. This command provides the following options:

•show circuits - Displays all circuit information for circuits that are currently up

•show circuits all - Displays all circuit information regardless of circuit state

•show circuit name circuit name - Displays circuit information for a specific circuit regardless of state

To list all circuits and their interfaces in the Up state, enter:

#show circuits

To list all circuits and their interfaces regardless of their state, enter:

#show circuits all

To list an individual circuit, enter:

#show circuits name VLAN5

Table 1-10describes the fields in the show circuits command output.

Table 1-10 Field Descriptions for the show circuits Command

	Field	Description
	Circuit Name	The circuit name. The VLAN name appear in uppercase, with
		no space before the VLAN number.
	Circuit State	The state of the circuit. The possible states are as follows:
		•	active-ipEnabled
		•	down-ipEnabled
		•	active-ipDisabled
		•	down-ipDisabled
	IP Address	IP interface address.
	Interface(s)	The interface associated with the circuit.
	Operational	The operational status of the interface (Up or Down).
	Status
	Cisco Content Services Switch Routing and Bridging Configuration Guide
OL-4580-01				1-37