Connecting Your
Connecting a VCR
For the
Then use an analog audio cable to connect the TX- 8522’s VIDEO OUT L/R jacks to the analog audio input jacks on the VCR, and use a video cable to connect the
In addition, connect the
You can select the video and sound from the VCR simultaneously by pressing the VIDEO input selector button.
For the
Use an analog audio cable to connect the
VIDEO
IN
V
MONITOR
OUT
IN
V | L |
R |
VIDEOVIDEO
V
L
R
VIDEO
L | R |
| L | R |
VIDEO | AUDIO | VIDEO | AUDIO | VIDEO |
IN | IN | IN | OUT | OUT |
Connecting aTV or Other Component with an Audio Output
For the
For the
IN
L
R |
L R
AUDIO
OUT
Connecting Components
If you connect other Onkyo components to the receiver
with the appropriate and audio cables, you can use
the following system functions. cables are special
cables solely for use with Onkyo products (no cables are supplied with the receiver).
Auto Power On
When you turn on the power or start playback on a component that’s connected to the receiver, the receiver will turn on automatically. And when you set the receiver to Standby, all connected components will go on Standby as well (the receiver’s POWER switch must be set to ON for this to work).
Direct Change
When playback is started on an audio component
connected via , the receiver will automatically select that component as the input source.
Remote Control Operation
You can control all components in your system by using the receiver’s remote controller. See page 10 for more information.
18