Onkyo TX-8222, TX-8522 instruction manual Using the Remote Controller

TX-85228222_En.book 10 ページ ２００６年５月４日 木曜日 午前１１時５１分

Remote Controller

TX-8522 North American model (RC-664S)

TX-8522 Other models (RC-665S) TX-8222 All models (RC-666S)

1

2

3

4

1

9

J 2

K

3*

L

4

9 J

K

L

5

6

7

M

N

O

P Q

R

S

T

5

M

N

O

P Q

R

T

8

U 8

U

*For the RC-666S, the names for the INPUT SELECTOR buttons differ from the ones shown above.

Using the Remote Controller

Point the remote controller toward the remote control sensor.

Remote control sensor

About 5 m (16 feet)

Notes:

•The remote controller may not work reliably if the receiver is subjected to bright light, such as direct sunlight or inverter-type fluorescent lights. Keep this in mind when installing.

10

•If another remote controller of the same type is used in the same room, or the receiver is installed close to equipment that uses infrared rays, the remote controller may not work reliably.

•Don’t put anything, such as a book, on the remote controller, because the buttons may be pressed inadvertently, thereby draining the batteries.

•The remote controller may not work reliably if the receiver is installed in a rack behind colored glass doors. Keep this in mind when installing.

•The remote controller will not work if there’s an obstacle between it and the receiver’s remote control sensor.