NAD L75 Audio Operations, Muting Button On The Remote Control Unit, Sleep Timer Operation

AUDIO OPERATIONS

NOTES

	The following points apply throughout the “Audio Operations”
	sections unless otherwise noted. To simplify explanations, instructions
	refer to names of buttons and controls on the front panel, making
	no mention of the use of remote control unit.
PHONES	PRIVATE LISTENING
	For private listening, insert the headphones (1/4-inch plug) into the
	PHONES jack.

GB

NOTE

When playing movie or music with 5.1 channels through Dolby Digital or DTS, multi-channel signal will be automatically down-mixed to 2-channel stereo. VFL Display will show ‘Digital stereo’ icon or ‘DTS stereo’ icon. The output via speakers will be muted.

MUTING BUTTON (ON THE REMOTE CONTROL UNIT)

Press this to mute the sound from the speakers and headphones when answering the telephone, etc. To restore the original volume, press the MUTING button again. While Muting is engaged, the Display will say “MUTE”.

SLEEP

SLEEP TIMER OPERATION

SLEEP Timer Function (on the Remote Control Unit)

This function allows you to preprogram the receiver to switch its own power off automatically. You can then enjoy the audio/video system for a specified amount of time without having to worry about turning the unit off later. Each press of the SLEEP button changes the time indication by 10 minutes.

SLEEP 90 SLEEP 80 SLEEP 10

Released condition

To let the remaining time (until power off) appear on the display while the sleep timer is engaged, press the SLEEP button once.

WHEN TO USE RESET SWITCH

1When this system is subjected to an electrical shock.

2When the power is irregular. In these cases, try the following (in power standby mode.):

MUTE

Rear Panel

Press the RESET switch lightly once or twice with a pencil or ballpoint pen

NOTE

When the RESET switch is pressed, all the memory will be cancelled.

10