4.10 Volume
To adjust the volume, ensure the RINGER switch is ON, and press the 
buttons. There are
four volume levels. 
increases volume, 
decreases volume.
The volume LED is in the handset’s display, and the volume level is shown in the display.
•VOL 1 is the lowest volume level
•VOL 4 is the highest volume level.
4.11 Call Timer
The total talk time of a call is displayed on the bottom line of the handset display.
5.Caller ID (CID) features
Caller ID (CID) features include various caller identification and call waiting functions. The storing, reviewing, transferring and reformatting of CID information as well as making phone calls using CID information is part of the overall Caller ID functionality.
Time | Date | New call |
| ||
| FRED PAGE | |
Caller ID phone number | Caller ID name | |
Note: Caller ID is a local network operator service and may not be available in all locations. You must subscribe to the operator’s service in order to use this feature.
The cordless phone will receive and display Caller ID information transmitted by your local network operator service. This information may include the phone number, date and time; or the name, phone number, date, and time. The handset stores up to 40 calls for later review.
The local network
5.1 Call Waiting Caller ID
Note: Call Waiting Caller ID is a local network operator service and may not be available in all loca- tions. You must subscribe to the operator’s service in order to use this feature.
Provided you subscribe to Call Waiting Caller ID service from your local network operator, you may see in the display who is your second caller while on a call.
•You will hear the call waiting beep when a second call comes in.
•The caller identification information appears in the display after you hear the dial tone.
To activate Caller Waiting ID, press the FLASH/PROGRAM button to put the first person on hold and answer the second incoming call.
5.2 Receiving and Storing CID Records
Note: Check with your local network operator for name service availability.
When you receive a call, the information is transmitted by the network operator to your Caller ID handset between the first and second ring.
When the GN 7170’s Caller ID memory is full (40 numbers), a new call record automatically replaces the oldest call record in memory. Note the following display explanations:
•NEW appears in the display for calls received that have not been reviewed.
•REPT indicates that a new call from the same number was received more than once.
10
GN7170_userguide.ind 10
13/08/04 9:56:05
