![](/images/new-backgrounds/1305226/30522613x1.webp)
2.Gently snap on the headband around the headset receiver.
3.Insert the headset’s plug into the cordless phone headset jack.
4.Place the headset into the headset stand, or place the headband on your head so that it rests comfortably on your head and that the ear cushion rests on your ear.
Note: The microphone on the boom arm should be pointed in the direction of your mouth.
3.Features and Customization
There are 5 programmable menus available: language, area code, ringer tone, tone/pulse dialing, and default setting selection. We suggest you customize your GN 7170 in this order:
3.1 Language setting selection
1.Press the FLASH/PROGRAM button until 1ENG 2FRA 3ESP shows in the display. 1ENG is the default position.
2.Use the or
button (or the number keypad) to scroll to your selection.
3.Press the FLASH/PROGRAM button to store the selection.
3.2 Area code selection
To select the area code, complete the following:
1.Press the FLASH/PROGRAM button until AREA CODE shows in the display.
•
2.Use the number keypad to enter your
Note: If you make a mistake, press the CH/DELETE button to erase the wrong area code. Repeat step 2.
3.Press the FLASH/PROGRAM button to store the selection.
3.3 Ringer tone selection
To select the ringer tone, complete the following:
1.Press the FLASH/PROGRAM button until RINGER/TONE shows in the display.
1 is the default position.
2.Use the or
button (or the number keypad) to move the display’s arrow indicator to 1, 2 or 3.
3.Press the FLASH/PROGRAM button to store the selection.
Tone/pulse dialing selection
Note: The GN 7170 automatically defaults to
To select tone/pulse dialing, complete the following:
1.Press the FLASH/PROGRAM button until 1TONE 2 PULSE shows in the display.
• 1TONE is the default position
2.Use the or
button (or the number keypad) to move the display’s arrow indicator to 1TONE or 2 PULSE.
3.Press the FLASH/PROGRAM button to store the selection.
3.4 Default setting selection
If required, you may return your GN 7170 to its
1.Press the FLASH/PROGRAM button until DEFAULT shows in the display.
• 1 NO is the default setting.
7
GN7170_userguide.ind 7
13/08/04 9:55:52