NAD L75 Using The Remote Control Unit Notes, Battery Installation, Battery Replacement

REMOTE CONTROL UNIT

USING THE REMOTE CONTROL UNIT

NOTES

•Ensure the slide switch near the bottom of the remote’s fascia is in the “RCVR” position, otherwise most buttons on the remote will not operate the receiver.

•Even if the remote control unit is operated within the effective range, remote control operation may be impossible if there are any obstacles between the unit and the remote control.

•If the remote control unit is operated near other appliances which generate infrared rays, or if other remote control devices using infrared rays are used near the unit, it may operate incorrectly. Conversely, the other appliances may also operate incorrectly.

BATTERY INSTALLATION

1Remove the battery compartment cover.

2Insert two “AAA” (R03, UM-4) dry batteries. Make sure that the batteries are inserted with their positive and negative poles positioned correctly.

3Close the cover until it clicks.

BATTERY REPLACEMENT

If the distance required between the remote control unit and main unit decreases, the batteries are exhausted. In this case replace the batteries with new ones.

PRECAUTIONS CONCERNING BATTERIES

•Be sure to insert the batteries with correct positive “+” and negative “-” polarities.

•Use batteries of the same type. Never use different types of batteries together.

•Rechargeable and non-rechargeable batteries can be used. Refer to the precautions on their labels.

•When the remote control unit is not to be used for a long time (more than a month), remove the batteries from the remote control unit to prevent them from leaking. If they leak, wipe away the liquid inside the battery compartment and replace the batteries with new ones.

•Do not heat or disassemble batteries and never dispose of old batteries by throwing them in a fire.

GB

23