7
2

Chapter 2

Installation
This Chapter covers the physical installation of the LevelOne Broadband
Router.

Requirements

Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
TCP/IP protocol must be installed on all PCs.
For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable
modem (for WAN port usage)
For shared access to the attached printer, the following clients are supported:
Windows 95/98/ME
Windows NT 4.0, 2000 or XP
Unix (LPD printing)

Procedure

Figure 5: Installation Diagram
1. Choose an Installation Site
Select a suitable place on the network to install the LevelOne Broadband Router.
Ensure the LevelOne Broadband Router and the DSL/Cable modem are powered OFF.
2. Connect LAN Cables
Use standard LAN cables to connect PCs to the Switching Hub ports on the LevelOne
Broadband Router. Both 10BaseT and 100BaseT connections can be used simultaneously.
If required, you can connect the "LAN1" port to another Hub: