LevelOne Broadband Router User Guide

Macintosh Clients

From your Macintosh, you can access the Internet via the LevelOne Broadband Router. The procedure is as follows.

1.Open the TCP/IP Control Panel.

2.Select Ethernet from the Connect via pop-up menu.

3.Select Using DHCP Server from the Configure pop-up menu. The DHCP Client ID field can be left blank.

4.Close the TCP/IP panel, saving your settings.

Note:

If using manually assigned IP addresses instead of DHCP, the required changes are:

•Set the Router Address field to the LevelOne Broadband Router's IP Address.

•Ensure your DNS settings are correct.

Linux Clients

To access the Internet via the LevelOne Broadband Router, it is only necessary to set the LevelOne Broadband Router as the "Gateway".

Ensure you are logged in as "root" before attempting any changes.

Fixed IP Address

By default, most Unix installations use a fixed IP Address. If you wish to continue using a fixed IP Address, make the following changes to your configuration.

•Set your "Default Gateway" to the IP Address of the LevelOne Broadband Router.

•Ensure your DNS (Name server) settings are correct.

To act as a DHCP Client (recommended)

The procedure below may vary according to your version of Linux and X -windows shell.

1.Start your X Windows client.

2.Select Control Panel - Network

3.Select the "Interface" entry for your Network card. Normally, this will be called "eth0".

4.Click the Edit button, set the "protocol" to "DHCP", and save this data.

5.To apply your changes

•Use the "Deactivate" and "Activate" buttons, if available.

•OR, restart your system.

Printing Setup on Linux (FBR-1403TX only)

The LevelOne Broadband Router supports LPD Printing on Linux.

•The LevelOne Broadband Router supports 3 "Logical Printers" under LPD. To configure the "Logical Printers" on the LevelOne Broadband Router, refer to Printer Port in Chapter 7.

•The procedure to install a LPD printer is detailed below, but may vary according to your version of Linux and X -windows shell.

1.In your X Windows shell, select Control Panel, then Printer Configuration.

36

Page 38 Page 40
Page 39
Image 39
LevelOne FBR-1402TX manual Macintosh Clients, Linux Clients, Printing Setup on Linux FBR-1403TX only, Fixed IP Address
Page 38 Page 40

FBR-1403TX, FBR-1402TX specifications

The LevelOne FBR-1402TX and FBR-1403TX are compact and efficient solutions in the realm of networking devices, designed to meet the growing demand for reliable connectivity in both home and office environments. These products, part of LevelOne’s range of networking equipment, provide essential features that enhance data transmission and networking capabilities.

The FBR-1402TX is configured with two Fast Ethernet ports, making it an excellent choice for users needing straightforward connectivity solutions. Its robust design allows for simple installation, requiring no complex setup. This device supports auto-sensing technology, which automatically detects and adjusts the speed of connected devices, ensuring optimal performance regardless of network conditions. It also supports full duplex, which effectively doubles the bandwidth, allowing for more efficient communication between devices.

On the other hand, the FBR-1403TX extends connectivity further with three Fast Ethernet ports, catering to users who need to connect multiple devices simultaneously. This model also incorporates the same auto-sensing capabilities as the FBR-1402TX, ensuring that all connected devices operate at the best possible speed. Both devices prioritize user-friendliness, featuring a plug-and-play design that simplifies the networking experience for individuals of varying technical expertise.

In terms of technologies, both models utilize advanced networking standards such as IEEE 802.3 for Ethernet, IEEE 802.3u for Fast Ethernet, and IEEE 802.3x for flow control. This adherence to established standards guarantees compatibility with a wide range of devices, from computers to printers, enhancing the versatility of the FBR-1402TX and FBR-1403TX.

Both models are also energy-efficient, designed with low power consumption in mind, further reflecting LevelOne’s commitment to sustainability. They come with built-in status LEDs, offering instant visual feedback regarding power status and connection integrity.

In summary, the LevelOne FBR-1402TX and FBR-1403TX are versatile, efficient, and user-friendly networking solutions that cater to various connectivity needs. With their advanced features and reliable design, they serve as effective tools for enhancing network performance in both residential and small business environments. Whether a user requires a simple two-port switch or a more complex three-port option, LevelOne’s offerings provide the necessary capabilities to succeed in today’s interconnected world.
Top Page Image Contents