LevelOne Broadband Router User Guide
Figure 15: Windows NT4.0 - IP Address
3.Select the network card for your LAN.
4.Select the appropriate radio button - Obtain an IP address from a DHCP Server or Specify an IP Address, as explained below.
Obtain an IP address from a DHCP Server
This is the default Windows setting. Using this is recommended. By default, the LevelOne Broadband Router will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the LevelOne Broadband Router.
Specify an IP Address
If your PC is already configured, check with your network administrator before making the following changes.
1.The Default Gateway must be set to the IP address of the LevelOne Broadband Router. To set this:
•Click the Advanced button on the screen above.
•On the following screen, click the Add button in the Gateways panel, and enter the LevelOne Broadband Router's IP address, as shown in Figure 16 below.
•If necessary, use the Up button to make the LevelOne Broadband Router the first en- try in the Gateways list.
22
