LevelOne FBR-1403TX, FBR-1402TX manual Routing Screen, Using this Screen, Static Routing Table

Models: FBR-1403TX FBR-1402TX

1 92
Download 92 pages 40.29 Kb
Page 83
Image 83

LevelOne Broadband Router User Guide

If the MAC address is changed, the LevelOne

Broadband Router must restart.

Routing

Overview

If you don't have other Routers or Gateways on your LAN, you can ignore the "Routing" page completely.

If the LevelOne Broadband Router is only acting as a Gateway for the local LAN seg- ment, ignore the "Routing" page even if your LAN has other Routers.

If your LAN has a standard Router (e.g. Cisco) on your LAN, and the LevelOne Broad- band Router is to act as a Gateway for all LAN segments, enable RIP (Routing Information Protocol) and ignore the Static Routing table.

If your LAN has other Gateways and Routers, and you wish to control which LAN seg- ments use each Gateway, do NOT enable RIP (Routing Information Protocol). Configure the Static Routing table instead. (You also need to configure the other Routers.)

If using Windows 2000 Data center Server as a software Router, enable RIP on the Leve- lOne Broadband Router, and ensure the following Windows 2000 settings are correct:

Open Routing and Remote Access

In the console tree, select Routing and Remote Access , [server name], IP Routing,

RIP

In the "Details" pane, right-click the interface you want to configure for RIP version 2, and then click "Properties".

On the "General" tab, set Outgoing packet protocol to "RIP version 2 broadcast", and Incoming packet protocol to "RIP version 1 and 2".

Routing Screen

The routing table is accessed by the Routing link on the Advanced screen.

Using this Screen

Generally, you will use either RIP (Routing Information Protocol) OR the Static Routing Table, as explained above, although is it possible to use both methods simultaneously.

Static Routing Table

If RIP is not used, an entry in the routing table is required for each LAN segment on your Network, other than the segment to which this device is attached.

The other Routers must also be configured. See Configuring Other Routers on your LAN later in this chapter for further details and an example.

80

Page 83
Image 83
LevelOne FBR-1403TX, FBR-1402TX manual Routing Screen, Using this Screen, Static Routing Table

FBR-1403TX, FBR-1402TX specifications

The LevelOne FBR-1402TX and FBR-1403TX are compact and efficient solutions in the realm of networking devices, designed to meet the growing demand for reliable connectivity in both home and office environments. These products, part of LevelOne’s range of networking equipment, provide essential features that enhance data transmission and networking capabilities.

The FBR-1402TX is configured with two Fast Ethernet ports, making it an excellent choice for users needing straightforward connectivity solutions. Its robust design allows for simple installation, requiring no complex setup. This device supports auto-sensing technology, which automatically detects and adjusts the speed of connected devices, ensuring optimal performance regardless of network conditions. It also supports full duplex, which effectively doubles the bandwidth, allowing for more efficient communication between devices.

On the other hand, the FBR-1403TX extends connectivity further with three Fast Ethernet ports, catering to users who need to connect multiple devices simultaneously. This model also incorporates the same auto-sensing capabilities as the FBR-1402TX, ensuring that all connected devices operate at the best possible speed. Both devices prioritize user-friendliness, featuring a plug-and-play design that simplifies the networking experience for individuals of varying technical expertise.

In terms of technologies, both models utilize advanced networking standards such as IEEE 802.3 for Ethernet, IEEE 802.3u for Fast Ethernet, and IEEE 802.3x for flow control. This adherence to established standards guarantees compatibility with a wide range of devices, from computers to printers, enhancing the versatility of the FBR-1402TX and FBR-1403TX.

Both models are also energy-efficient, designed with low power consumption in mind, further reflecting LevelOne’s commitment to sustainability. They come with built-in status LEDs, offering instant visual feedback regarding power status and connection integrity.

In summary, the LevelOne FBR-1402TX and FBR-1403TX are versatile, efficient, and user-friendly networking solutions that cater to various connectivity needs. With their advanced features and reliable design, they serve as effective tools for enhancing network performance in both residential and small business environments. Whether a user requires a simple two-port switch or a more complex three-port option, LevelOne’s offerings provide the necessary capabilities to succeed in today’s interconnected world.