TROUBLESHOOTING

To determine any problem with your receiver, always check the most obvious possible causes first. If any problem still remains after your have checked the items below, consult your nearest NAD dealer.

Problem

Probable Cause

Remedy

 

 

 

Amplifier

 

 

When listening to the music in stereo, left/right

Speakers are connected wrong.

After checking, if needed, reconnect.

speakers sounds reversed.

 

 

Low hum or buzzer sound.

Power line of a fluorescent light is installed near this product.

Place this product as far away as possible from electric devices with interference.

Sound is only heard from one channel.

One of the input cords is disconnected.

The BALANCE control is set to one side.

 

 

 

 

Connect the input cords securely.

Adjust the BALANCE control.

 

 

 

Sound cuts off during listening to the music or no

Speaker impedance is less than prescribed for this

After turning off the power and then turning it on

sound even though power is ON.

unit.

again, reduce the volume or change to the correct 8

 

 

ohm speakers.

Low bass response.

 

 

Speaker polarity (+/-) is reversed.

 

Tuner

 

 

 

 

An unusual hissing noise is heard when listening to

 

 

A slight noise may be heard because the method

 

the broadcast in stereo, but not heard when

 

 

used for modulation of FM stereo broadcasts is

 

listening monaurally.

 

 

different than that used for monaural broadcasts.

 

 

 

 

 

 

Noise is excessive in both stereo and monaural

 

 

Poor location and / or direction of the antenna.

 

broadcasts.

 

 

 

 

 

 

 

 

 

 

 

 

Transmitting station is too far away.

 

 

 

 

 

 

Sound is distorted and/or the volume level becomes

 

 

Broadcast signals are being disturbed.

 

low.

 

 

 

 

 

 

 

 

 

Excessive distortion in the sound of stereo

 

 

Speaker system connections are not correct.

 

broadcasts.

 

 

 

 

 

 

 

 

 

Check all speakers for correct polarity.

Try reducing the treble sound by turning the treble controls.

Try changing the location, height and/or direction of the antenna.

Set the FM mode to monaural by pressing the FM MUTE/MONO button. (Note that the broadcast will then be heard as monaural sound).

If an indoor antenna is being used, change to an outdoor antenna.

Try using an antenna with more elements.

Surround Effects - Important The center and rear speakers only operate when the unit is set on a Surround Sound mode and the source material being played is recorded or broadcast in Dolby Digital, DTS or Dolby Pro Logic surround sound. Stereo broadcasts or recordings will produce some rear channel effects when played in a surround mode. However, mono sources will not produce any sound from the rear speakers.

No sound from the rear speakers.

GB

 

SURROUND MODE button is set to STEREO.

 

Set the button to the desired surround mode

 

 

 

position.

 

 

 

 

 

 

 

 

 

 

 

Source being played is not recorded or broadcast in

 

Use surround or stereo source.

 

surround sound or stereo.

 

 

 

 

 

 

One or more rear speaker wires is not making good contact.

Check all rear speaker wires for good connection.

No sound from the center speaker.

SURROUND mode button is not set to DTS, DOLBY DIGITAL, DOLBY PRO LOGIC or 3 STEREO.

Set the button to DTS, DOLBY DIGITAL, DOLBY PRO LOGIC or 3 STEREO.

Remote Control Unit

Remote control not working.

The batteries are exhausted.

Replace with new batteries.

The remote control unit is too far from the receiver or out of the effective range.

Operate the remote control unit within the effective range.

24

Page 24
Image 24
NAD L75 owner manual Troubleshooting, Tuner

L75 specifications

The NAD L75 is an innovative audio component that represents a fusion of modern technology and high-fidelity sound, catering to audiophiles and casual listeners alike. This versatile device embodies NAD's commitment to quality and performance while embracing contemporary connectivity features.

One of the standout features of the L75 is its ability to deliver high-quality sound through a robust amplifier capable of producing 75 watts per channel. This power ensures that the L75 can drive a wide range of speakers, optimizing sound quality regardless of the listening environment. The Class D amplification technology utilized in the L75 not only enhances efficiency but also minimizes distortion, allowing for clearer and more dynamic audio reproduction.

In terms of connectivity, the L75 shines with its multi-source capabilities. It includes built-in Bluetooth, enabling seamless streaming from smartphones, tablets, and computers without the need for cumbersome wiring. This feature caters to the growing demand for wireless audio solutions while maintaining the integrity of sound reproduction. Additionally, the L75 supports a range of digital inputs, including USB and optical, allowing users to connect various devices easily and enhance their listening experience.

The user-friendly interface of the NAD L75 is another notable characteristic. Equipped with a clear, intuitive display and simple navigation, users can easily switch between sources and adjust settings with minimal fuss. It also features an intuitive smartphone app, further enhancing user interaction and enabling control from the palm of one’s hand.

NAD’s commitment to audio excellence is evident in the L75’s advanced digital signal processing (DSP) capabilities, which help to optimize the sound for different rooms and environments. This technology tailors the audio output to compensate for room acoustics, ensuring that listeners experience the best possible sound quality, regardless of their setup.

Furthermore, the aesthetic design of the L75 adds to its appeal. Its sleek, contemporary look complements modern home decor while remaining functional. The combination of high-quality materials and meticulous craftsmanship results in a product not just built for performance but also built to last.

Overall, the NAD L75 is a comprehensive solution for anyone looking to elevate their audio experience. With its potent amplification, multi-source connectivity, user-friendly interface, and smart DSP capabilities, it stands out in the crowded field of audio components, delivering unparalleled performance and versatility.