Specifications
Range |
|
|
| Up to 100 feet (30.5 m) |
Rated Voltage |
|
|
| 3 VDC |
Frequency |
|
|
| 315 MHz |
| Troubleshooting Guide |
|
| |
|
|
|
|
|
SYMPTOM |
| POSSIBLE CAUSE |
| SOLUTION |
|
|
|
|
|
Remote control does not come on. | 1. | Batteries installed incorrectly. | 1. | Install batteries according to polarity |
|
|
|
| markings inside remote control. |
| 2. | Batteries are dead. | 2. | Replace batteries. |
|
|
|
|
|
Remote control will not operate receiver. | 1. | Dip switch settings on receiver do not | 1. | Check dip switch settings on receiver. |
|
| match controller. |
|
|
| 2. | Wrong group or channel is selected. | 2. | Verify correct group and channel are |
|
|
|
| selected. |
| 3. | Signals from controller are being | 3. | Checkformetalobjectsthatcouldblock |
|
| blocked, or transmitter is out of range. |
| the signal, or reposition the transmitter |
|
|
|
| and/or receiver. |
| 4. | Batteries are weak. | 4. | Replace batteries. |
|
|
|
|
|
Technical Service
Please call
If you experience a problem, follow this guide.You may also want to visit our Web site at: www.hzsupport.com. If the problem persists, call* for assistance at
HeathCo LLC
P.O. Box 90004, Bowling Green, KY
*If contacting Technical Service, please have the following information available: Model Number, Date of Purchase, and Place of Purchase.
No Service Parts Available for this Product
ENGLISH
Regulatory Information
This device complies with Part 15 of the FCC Rules and
(1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The user is cautioned that changes or modifications not expressly approved by the party responsible for regulatory compliance could void the user’s authority to operate the equipment.
