NAD L75 Connecting Video Equipment, Video Signal Jacks, S-Videosignal Jacks, Audio Signal Jacks

CONNECTING VIDEO EQUIPMENT

AUDIO SIGNAL JACKS

•Connect the video deck (VCR) LINE output (AUDIO OUT) jacks to the IN (VIDEO 1) jacks, and the video deck (VCR) LINE input (AUDIO IN) jacks to the OUT (VIDEO 1) jacks.

•Connect the LD player AUDIO OUTPUT jacks to the VIDEO 2 jacks.

•Connect the DVD player’s analogue Left and Right AUDIO OUTPUT jacks to the DVD jacks.

VIDEO SIGNAL JACKS

•Connect the TV monitor VIDEO IN jack to the MONITOR OUT jack.

•Connect the video deck (VCR) VIDEO OUT (VIDEO) jack to the IN (VIDEO 1) jack. Connect the video deck (VCR) VIDEO IN jacks to the OUT (VIDEO 1) jack.

•Connect the LD player VIDEO OUTPUT jacks to the VIDEO 2 IN jack.

•Connect the DVD player or Decoder VIDEO OUTPUT jacks to the DVD IN jacks.

S-VIDEO SIGNAL JACKS

•Connect the TV monitor S-VIDEO IN jack to the MONITOR OUT jack.

•Connect the video deck (VCR) S-VIDEO OUT jack to the S-VIDEO VIDEO1 IN jack. Connect the video deck (VCR) S-VIDEO IN jack to the S-VIDEO VIDEO1 OUT jack.

•Connect the LD player S-VIDEO OUTPUT jacks to the VIDEO2 IN jack.

•Connect the DVD or Decoder S-VIDEO OUTPUT jacks to the S-VIDEO DVD IN jack.

NOTES

•The FUNCTION (source) selector for the S-VIDEO inputs and VIDEO inputs work in conjunction with each other.

•This unit’s S-VIDEO (IN/OUT) jacks and VIDEO (IN/OUT) pin jacks have independent circuit structures, so that video signals input from the S-VIDEO jacks are only output from the S-VIDEO jack outputs and video signals input from the VIDEO pin jacks are only output from the VIDEO pin jack outputs.

DOLBY DIGITAL (AC-3)/DTS/PCM DIGITAL IN JACKS

•If the DVD player or Decoder is provided with either a coaxial or optical digital output, connect to respectively DVD Coaxial or Digital input.

•If a Digital music source, such as MiniDisc or MP3 player is provided an optical digital output, connect to AUX Digital input.

•When an optical connection is used for connection, remove the caps protecting both ends of the optical cable and the connectors. Remove the protective cap from the input socket.

DIGITAL OUT (OPTICAL AND COAXIAL)

•Connect the coaxial or optical digital input on CD or MiniDisk Recorder to the coaxial respectively optical Digital output of the L75.

NOTES

Do not connect both the coaxial and optical Digital Outputs to the corresponding Digital inputs on the same recording device.

GB

9