Xantech 680-10 installation instructions Remote AC Switcher, Features and Specifications

INSTALLATION INSTRUCTIONS

680-10

REMOTE AC SWITCHER

The Model 680-10 is an IR Remote Controlled AC Switcher with six AC outlet receptacles. It accepts RC68+ (or RC68) IR Programmer commands coming from any Xantech IR receiver, keypad, or controller direct- wired to its IR Input port. Switching modes of ON, OFF, Toggle, Momentary and Group are possible. Each outlet is switched ON or OFF by a high current electromechanical relay for higher reliability than solid state switching methods.

Sequential ON commands for each outlet are possible when used in conjunction with learning devices, such as Xantech URC-1 remotes, Smart Pads, or 590 controllers.

Since the 680-10 has 30 installer-adjustable IR code groups, it allows multiple 680-10's to be individually controlled when used in the same system.

		OUTLET 1	OUTLET 2	IR
				OUTLET 3
		5A MAX	5A MAX	5A MAX
				CONFIRM INPUT
				680-10
				REMOTE AC SWITCHER
➧	RESET		TOTAL LOAD LIMITED TO 15A
				TEMPORARY POWER TAP
				CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
				USE INDOORS IN A DRY LOCATION.
120 VAC
15A MAX		OUTLET 4	OUTLET 5	OUTLET 6
		5A MAX	5A MAX	5A MAX

	Fig. 1 Model 680-10 IR Remote Controlled AC Switcher
	FEATURES AND SPECIFICATIONS
.	• Six AC Outlets rated at 120 VAC, 5 Amps each.
	• 15 Amps total current rating.
	• Includes 15-Amp circuit breaker.
	• 14-Gauge heavy duty 3-conductor power cord, 5-1/2 feet in length, with a grounded 3-prong plug.
	• IR input jack (3.5mm mini phone jack)
	• An LED indicator lights to confirm the presence and acceptance of 680-10 IR commands.
	• Requires RC68+(or RC68) hand-held Programmer codes set to a matching IR code group.
	• The 680-10 is factory preset to code group 88.
	• Dimensions: 15-1/2" W x 4-1/2" D x 2-3/8" H..
	RC68+ PROGRAMMER / REMOTE CONTROL
	The RC68+ (or RC68) Programmer (available separately) contains all the commands necessary to operate
	the 680-10 (see Fig. 2).

•You will need it to program universal learning devices such as the Xantech URC-1 learning remote, the Xantech Smart Pads, the 590 Programmable Controller, the 710 Fone Link, etc., with commands that operate the 680-10.

•NOTE: The RC68+ codes operate several other Xantech models as well, such as the RS41AV, CC12, ZPR68, etc. Therefore, only the button descriptions that apply to the operation of the 680-10 are listed in the Button Descriptions section. All others should be ignored.



1

Remote Control Switchers