Specifications (TX-8522)
Amplifier Section
Rated Output Power (FTC) (North American)
All channels: | 100 watts minimum continuous power |
| per channel, 8 ohm loads, 2 channels |
| driven from 20 Hz to 20 kHz, with a |
| maximum total harmonic distortion of |
| 0.08 % |
Rated Output Power (IEC) (European and Australian)
2 ch ⋅ 100 W at 4 ohms, 1 kHz, 2 ch driven
Maximum Output Power (JEITA) (Asian)
130 W at 4 ohms, 1 kHz, 2 ch driven
Dynamic Power
North American: 170 W + 170 W (2 Ω) 135 W + 135 W (4 Ω)
140 W + 140 W (8 Ω)
European and Australian:
145 W + 145 W (2 Ω)
120 W + 120 W (4 Ω)
75 W + 75 W (8 Ω)
THD (Total Harmonic |
|
Distortion) | 0.08 % (Power Rated)/ 0.08 % (1 kHz, |
| 1 W) |
Damping Factor | 60 (Front, 1 kHz, 8 Ω) |
Input Sensitivity and | 150 mV/ 50 kΩ (LINE) |
Impedance | |
| 2.5 mV/ 50 kΩ (PHONO MM) |
Output Level and | 150 mV/ 2.2 kΩ (REC OUT) |
Impedance | |
Frequency Response | 10 |
Tone Control | ±10 dB, 100 Hz (BASS) |
| ±10 dB, 10 kHz (TREBLE) |
Signal to Noise Ratio | 100 dB (LINE, |
| 80 dB (PHONO, |
Speaker Impedance | 4 |
General
Power Supply | North American: AC 120 V, 60 Hz |
| European and Australian: |
| AC 230 V, 50 Hz |
Power Consumption | North American: 2.8 A |
| European and Australian: 220 W |
Standby Power |
|
Consumption | North American: 0.2 W |
| European and Australian: 0.3 W |
Dimensions |
|
(W ⋅ H ⋅ D) | 435 ⋅ 150 ⋅ 332 mm |
| |
Weight | North American: 9.0 kg |
| 19.8 lbs. |
| European and Australian: 8.4 kg |
| 18.5 lbs. |
■Video Inputs
Composite | DVD, VIDEO |
■Video Outputs
CompositeVIDEO
■Audio Inputs
Analog Inputs | PHONO, CD, TAPE 1, TAPE 2, DVD, |
| VIDEO |
■Audio Outputs
Analog Outputs | TAPE 1, TAPE 2, VIDEO |
Speaker Outputs | SPEAKERS A |
| SPEAKERS B |
Phones | 1 |
IR Input/Output | 1/1 |
Video Section
Input Sensitivity/Output | 1 | Specifications and features are subject to change without |
Level and Impedance | notice. | |
Tuner Section |
|
|
|
|
|
■ FM |
|
|
Tuning Frequency |
|
|
Range | North American: 87.5 MHz– 107.9 MHz |
|
| Others: 87.5 MHz– 108.0 MHz |
|
Usable Sensitivity | Stereo: 22.2 dBf (75 Ω IHF) |
|
| Mono: 15.2 dBf (75 Ω IHF) |
|
Signal to Noise Ratio | Stereo: 67 dB |
|
| Mono: 73 dB |
|
THD | Stereo: 0.5 % (1 kHz) |
|
| Mono: 0.3 % (1 kHz) |
|
Frequency Response | 30 |
|
Stereo Separation | 40 dB (1 kHz) |
|
■ AM |
|
|
Tuning Frequency |
|
|
Range | North American: 530 |
|
| Others: 522 |
|
Usable Sensitivity | 300 µV |
|
Signal to Noise Ratio | 40 dB |
|
THD | 0.7 % |
|
34