Paradyne 8784 Network Interface Options, Main Menu→ Configuration→ Current Configuration→ Network

A. Configuration Options

Network Interface Options

For Network Interface Options, refer to Table A-1, Network Interface Options. To access the Network Interface Options screen, follow this menu selection sequence:

Main Menu→ Configuration→ Current Configuration→ Network

main/config/network		Hotwire
Slot 4		Model: 8784
Port 2
NETWORK INTERFACE OPTIONS
Margin Threshold:	–3db
Excessive Error Rate Threshold: 1E–6
AutoRate:	Disable
DSL Line Rate:	1552	Kbps
Peer IP Address:	111.255.255.000 Clear

Circuit Identifier:Clear

--------------------------------------------------------------------------------

Ctrl-a to access these functions, ESC for previous menu	MainMenu Exit
Save

Table A-1. Network Interface Options (1 of 2)

Margin Threshold

Possible Settings: –5db, –4db, –3db, –2db, –1db, 0db, 1db, 2db, 3db, 4db, 5db, 6db, 7db, 8db, 9db, 10db

Default Setting: 0db

Determines the level, expressed in decibels, at which a signal-to-noise margin condition is recognized.

–5dbto 10db – Sets the margin threshold to this value.

Excessive Error Rate Threshold

Possible Settings: 1E–4, 1E–5, 1E–6, 1E–7, 1E–8, 1E–9

Default Setting: 1E–6

Determines the error rate at which an excessive error rate (EER) condition is recognized. The rate is the ratio of the number of CRC errors to the number of bits received in a certain period.

1E–4to 1E–9– Sets the error rate threshold to this value.

A-2 February 2001 8784-A2-GB20-30