Paradyne 8784 manual Testing, Accessing the Test Menu, Main Menu→ Test

Testing

5

Accessing the Test Menu

From the Test menu, you can run network tests, data port tests, a lamp test for the front panel LEDs, or abort all tests.

To access the Test menu, follow this menu selection sequence:

Main Menu→ Test

main/test	Hotwire
Slot: 4	Model: 8784

TEST

Network & DSX-1 Tests

Device Tests

Abort All Tests

--------------------------------------------------------------------------------

Ctrl-a to access these functions, ESC for previous menu MainMenu Exit

Select . . .	To . . .
Network & DSX-1 Tests	Start and stop tests on the network or DSX-1 interface.
Device Tests	Start and stop lamp test.
Abort All Tests	To abort current tests excluding Network-initiated loopback
	tests. An aborted test may continue to run for a few seconds
	as the abort command is sent to the remote end and
	processed.

8784-A2-GB20-30 February 2001 5-1