Paradyne 8784 manual Switching Between Screen Work Areas, Example

2. Using the Asynchronous Terminal Interface

Switching Between Screen Work Areas

Select Ctrl-a to switch between the two screen areas.

Procedure

To access the screen function area below the dotted line:

1.Press Ctrl-a to switch from the screen area to the function keys.

2.Enter the designated (underlined) character for the function key or press the Tab key until you reach the desired function key.

Example:

To save the current options, type s or S (Save).

3.Press Enter. The function is performed.

4.To return to the screen area above the dotted line, press Ctrl-a again.

main/config/network	Hotwire
Slot: 4	Model: 8784
Port: 2
NETWORK INTERFACE OPTIONS
Margin Threshold:	–3db
Excessive Error Rate Threshold: 1E–5
AutoRate:	Disable
DSL Line Rate:	1552

Circuit Identifier:Clear

--------------------------------------------------------------------------------

Ctrl-a to access these functions, ESC for previous menu MainMenu Exit

2-8 February 2001 8784-A2-GB20-30