Line Loopback | Paradyne 8784 specs

5. Testing

Line Loopback

A Line Loopback (LLB) loops the received signal on the network interface back to the network without change.


				CAP		CAP		T1

DSL
Port

				Transceiver		Framer		Framer

LIU

AIS DSX-1 Port

98-16112

Procedure

To run a Line Loopback:

1.Position the cursor at the Start command next to Line Loopback on the Network & DSX-1 Tests screen.

2.Press Enter.

The Start command is changed to Stop.

3.To manually stop the test, verify that the cursor is positioned at the Stop command.

4.Press Enter.

The Line Loopback cannot be started when another loopback or pattern test is in progress.

8784-A2-GB20-30

February 2001

5-3

Image 53

Paradyne 8784 manual Line Loopback

Contents

Hotwire 8784 TDM Sdsl Termination Unit Copyright 2001 Paradyne Corporation All rights reserved Important Safety Instructions United States EMI Notice Contents February Initial Startup and ConfigurationMonitoring the Unit Messages and Troubleshooting TestingSecurity IP Addressing T Connector Pin Assignments Configuration OptionsTechnical Specifications Glossary Index Standards ComplianceT for Snmp Traps Document Summary About This GuideDocument Purpose and Intended Audience Document Number Document Title Product-Related Documents TDM Sdsl Overview About the Hotwire Termination Unit Hotwire 8784 Termination Unit Features CO Site Network ConfigurationCustomer Premises CP Management Information Base MIB Support Snmp Management CapabilitiesSnmp Trap Support Network Management Serial Port Settings Using the Asynchronous Terminal InterfaceUser Interface Access Initiating an ATI Session Logging In to the Hotwire DslamLogin Main Menu Select Snmp Menu Hierarchy Screen Work Areas Main Menu→ Configuration → Current Configuration → NetworkFunction Keys Press Navigating the ScreensKeyboard Keys For the screen Function Select Press Enter to Function Keys Example Switching Between Screen Work Areas Exiting From the Dslam Session Ending an ATI Session Using the Asynchronous Terminal Interface February Overview Initial Startup and Configuration Identity Entering Identity InformationMain Menu→ Control→ Change Identity Load Configuration from Configuring the UnitMain Menu→ Configuration Load Configuration From If you select Then Current and Default Factory ConfigurationsConfiguration EDIT/DISPLAY Select To Access To Configure Configuration LoaderMain Menu→ Configuration → Configuration Loader Configuration Loader Completed successfully Save Configuration Saving Configuration Changes Main Menu→ Control → Download Code Downloading FirmwareDownload Code DSL1 Apply Download Disabling AutoRate AutoRate FeatureMain Menu→ Configuration→ Current Configuration → Network Resetting AutoRate Restoring Access to the User InterfaceMain Menu→ Control→ Reset AutoRate Select Configuration→ DSL Cards → Reset Slot Main Menu→ Control→ Reset Device Resetting the Unit What to Monitor Monitoring the Unit System and Test Status Health and Status SELF-TEST Results Viewing System and Test StatusMain Menu→ Status→ System and Test Status Yyyyyyyy Health and Status Messages Monitoring the Unit Test Status Messages Meaning Self-Test Results MessagesTest Status Messages Performance Statistics Viewing Network Error StatisticsNetwork Error Statistics Field Contains SES Severely Errored Seconds Seconds during which more than Viewing Network Performance Statistics This Field Contains Current Network Performance Statistics Viewing Current Network PerformanceSES Febe DSX-1 Performance Statistics Viewing DSX-1 Performance StatisticsMain Menu→ Status→ Performance Statistics→ DSX-1 Statistics This Field Contains Display Viewing LED StatusGeneral DSL Loop LED is Indicating Front Panel LEDsType Accessing the Test Menu TestingMain Menu→ Test Test Network & DSX-1 Tests Running Network TestsMain Menu→ Test→ Network & DSX-1 Tests Line Loopback Repeater Loopback DTE Loopback Remote Send Line Loopback Send and Monitor Lamp Test Device TestsMain Menu→ Test→ Device Tests Device Tests Ending an Active Test Configuration Options Telco-Initiated Line Loopback Telco-Initiated TestsTelco-Initiated Payload Loopback Activation Line Payload Remote Line Deactivation Loopback CAP LIU DSL DSX-1 Telco-Initiated Remote Line Loopback Testing February Messages and Troubleshooting NMS Configuring Snmp TrapsSnmp Traps Options Device Messages 1 What Message Indicates What To Do Device Messages Device Messages 2 What Message Indicates What To Do Troubleshooting Symptom Possible Cause Solutions Troubleshooting Messages and Troubleshooting February Security ATI Access Levels Administer Logins Creating a Login On the Login Entry Screen, for Enter Deleting a Login Assigning Snmp Community Names and Access Types Controlling Snmp AccessManagement Options, in Appendix A, Configuration Options Configuration Options, to All Configurations Configurations Not Running IP Conservative SoftwareIP Addressing Selecting an IP Addressing Scheme Peer IP Address Assignments IP Addressing Example Configuration Changes in , Initial Startup and Configuration Configuration Options Excessive Error Rate Threshold Main Menu→ Configuration→ Current Configuration→ NetworkNetwork Interface Options Table A-1. Network Interface Options 1 Table A-1. Network Interface Options 2 DSL Line Rate Possible Settings 400, 528, 784, 1040AutoRate Circuit Identifier DSX-1 Interface Options Main Menu→ Configuration→ Current Configuration → DSX-1DSX-1 Interface Options ESF Port Status Table A-2. DSX-1 Interface Options 1Line Framing Line Coding Send AIS on Network Failure Table A-2. DSX-1 Interface Options 2Send All Ones on DSX-1 Failure Primary Clock Source Copy Ports Options Main Menu→ Configuration→ Current Configuration→ Copy PortsTable A-3. Copy Ports Options From Port n System Options Main Menu→ Configuration→ Current Configuration→ SystemSystem Options LTU Table A-4. System Options Telnet Session Options Management and Communication Menu Session Access Level Telnet Login RequiredInactivity Timeout Table A-5. Telnet Session Options 1 General Snmp Management Options Main Menu→ Configuration→ Current Configuration→Table A-5. Telnet Session Options 2 Disconnect Time Minutes Name 2 Access Name 1 AccessTable A-6. General Snmp Management Options Snmp Management Snmp NMS Security Options Snmp NMS Security Options NMS IP Validation Access LevelTable A-7. Snmp NMS Security Options Snmp Trap Options Snmp Traps Table A-8. Snmp Trap Options 1Number of Trap Managers NMS n Destination Table A-8. Snmp Trap Options 2 Link Traps Possible Settings Disable, Up, Down, BothEnterprise Specific Traps Link Traps Interfaces Standards Compliance for Snmp Traps AuthenticationFailureSnmp Traps WarmStart LinkUp/DownT Variable-Bindings LinkUp and linkDown Enterprise-Specific Traps DSL Network IfIndex RFC 50-Pin Connector DSX-1 Port Pinout Function Connector Pin AssignmentsFront Panel 50-pin DTE Connector Pinouts Connector Pin Assignments February Specifications Criteria Technical Specifications Technical Specifications February 511 GlossaryBridged tap COM port EIA-530-A Factory defaultsEthernet Frame 703 Reset704 IP address Router Yellow AlarmRS-449 Telnet IN-1 Index IN-2 IN-3 IN-4 IN-5 IN-6