Paradyne 8784 manual Procedure

3. Initial Startup and Configuration

5.Position the cursor at the Start Transfer field. Use the spacebar to select Yes. Press Enter.

When the data transfer is complete:

—If you selected Yes in Step 4, the unit is reset.

—If you selected No, the Transfer Status field changes to Completed successfully.

If you specified No (the default) in the Immediately Apply Download field in Step 4, you must now apply the download.

main/control/apply_download	Hotwire
Slot: 4	Model: 8784

APPLY DOWNLOAD

Switch To Code Revision A01.00.02: No

WARNING:

An answer of “yes” will cause the system

to reset as if it had been powered off and on!

-------------------------------------------------------------------------------

Ctrl-a to access these functions, ESC for previous		menu	MainMenu Exit
Select: Yes, No	LOS at	Net,	Pt 1

Procedure

To apply the downloaded firmware:

1.Press the Escape key to return to the Control menu. Select Apply Download.

2.On the Apply Download screen, type Yes to reset the card and activate the code.

Selecting Yes causes the termination unit to reset.

NOTE:

The termination unit has two flash memory banks to hold executable firmware. You can switch between these two firmware versions by applying the firmware listed on the Apply Download screen.

8784-A2-GB20-30 February 2001 3-9