Snmp Management Capabilities, Snmp Trap Support | Paradyne 8784

1. About the Hotwire 8784 Termination Unit

SNMP Management Capabilities

he Hotwire 8784 Termination Unit supports SNMP Version 1, and can be managed by any industry-standard SNMP manager and accessed using SNMP by external SNMP managers.

Management Information Base (MIB) Support

For a detailed description of supported MIBs, visit Paradyne’s Web site at wwwT.paradyne.com. The following MIBs are supported:

MIB II (RFC 1213 and RFC 1573) – Defines the general objects for use with a network management protocol in TCP/IP internets and provides general

Tinformation about the unit. MIB II is backward-compatible with MIB I.

DS1/E1 MIB (RFC 1406) – Reports the performance status of the DSX-1 interface and supports the features found on the DSX-1 Performance Statistics

Tscreen.

Paradyne Enterprise MIB – Supports configuration, status, statistics, and tests.

Select Clear to reset a field to a null value.

SNMP Trap Support

The Hotwire 8784 Termination Unit supports traps as defined in RFC 1215.

Operation, Maintenance

and Provisioning Center

Network

8784

Router

DSX-1

TDM SDSL

AC

T5A

250V

	EOC	AC	.
		INPUT	. ..
7984		8600 Series		Ethernet
		DSLAM		Interface

Ethernet

LAN

SNMP NMS

Data

01-16114a-03

1-4

February 2001

8784-A2-GB20-30

Image 14

Paradyne 8784 manual Snmp Management Capabilities, Management Information Base MIB Support, Snmp Trap Support, Network

Contents

Hotwire 8784 TDM Sdsl Termination Unit Copyright 2001 Paradyne Corporation All rights reserved Important Safety Instructions United States EMI Notice Contents February Initial Startup and ConfigurationMonitoring the Unit Security TestingMessages and Troubleshooting IP Addressing T Technical Specifications Glossary Index Configuration OptionsConnector Pin Assignments Standards ComplianceT for Snmp Traps Document Summary About This GuideDocument Purpose and Intended Audience Product-Related Documents Document Number Document Title About the Hotwire Termination Unit TDM Sdsl Overview Hotwire 8784 Termination Unit Features CO Site Network ConfigurationCustomer Premises CP Snmp Trap Support Snmp Management CapabilitiesManagement Information Base MIB Support Network Management Serial Port Settings Using the Asynchronous Terminal InterfaceUser Interface Access Initiating an ATI Session Logging In to the Hotwire DslamLogin Select Main Menu Menu Hierarchy Snmp Function Main Menu→ Configuration → Current Configuration → NetworkScreen Work Areas Keys Press Navigating the ScreensKeyboard Keys Function Keys For the screen Function Select Press Enter to Switching Between Screen Work Areas Example Ending an ATI Session Exiting From the Dslam Session Using the Asynchronous Terminal Interface February Initial Startup and Configuration Overview Identity Entering Identity InformationMain Menu→ Control→ Change Identity Load Configuration from Configuring the UnitMain Menu→ Configuration Load Configuration From If you select Then Current and Default Factory ConfigurationsConfiguration EDIT/DISPLAY Main Menu→ Configuration → Configuration Loader Configuration LoaderSelect To Access To Configure Configuration Loader Completed successfully Saving Configuration Changes Save Configuration Download Code Downloading FirmwareMain Menu→ Control → Download Code DSL1 Apply Download Disabling AutoRate AutoRate FeatureMain Menu→ Configuration→ Current Configuration → Network Main Menu→ Control→ Reset AutoRate Restoring Access to the User InterfaceResetting AutoRate Select Configuration→ DSL Cards → Reset Slot Resetting the Unit Main Menu→ Control→ Reset Device Monitoring the Unit What to Monitor System and Test Status Health and Status SELF-TEST Results Viewing System and Test StatusMain Menu→ Status→ System and Test Status Health and Status Messages Yyyyyyyy Monitoring the Unit Test Status Messages Meaning Self-Test Results MessagesTest Status Messages Performance Statistics Viewing Network Error StatisticsNetwork Error Statistics SES Severely Errored Seconds Seconds during which more than Field Contains Viewing Network Performance Statistics This Field Contains SES Viewing Current Network PerformanceCurrent Network Performance Statistics Febe DSX-1 Performance Statistics Viewing DSX-1 Performance StatisticsMain Menu→ Status→ Performance Statistics→ DSX-1 Statistics This Field Contains General Viewing LED StatusDisplay DSL Loop LED is Indicating Front Panel LEDsType Main Menu→ Test TestingAccessing the Test Menu Test Network & DSX-1 Tests Running Network TestsMain Menu→ Test→ Network & DSX-1 Tests Line Loopback Repeater Loopback DTE Loopback Remote Send Line Loopback Send and Monitor Main Menu→ Test→ Device Tests Device TestsLamp Test Device Tests Configuration Options Ending an Active Test Telco-Initiated Payload Loopback Telco-Initiated TestsTelco-Initiated Line Loopback Activation Line Payload Remote Line Deactivation Loopback Telco-Initiated Remote Line Loopback CAP LIU DSL DSX-1 Testing February Messages and Troubleshooting NMS Configuring Snmp TrapsSnmp Traps Options Device Messages Device Messages 1 What Message Indicates What To Do Device Messages 2 What Message Indicates What To Do Troubleshooting Troubleshooting Symptom Possible Cause Solutions Messages and Troubleshooting February ATI Access Levels Security Creating a Login Administer Logins Deleting a Login On the Login Entry Screen, for Enter Management Options, in Appendix A, Configuration Options Controlling Snmp AccessAssigning Snmp Community Names and Access Types Configuration Options, to IP Addressing Configurations Not Running IP Conservative SoftwareAll Configurations Selecting an IP Addressing Scheme IP Addressing Example Peer IP Address Assignments Configuration Options Configuration Changes in , Initial Startup and Configuration Network Interface Options Main Menu→ Configuration→ Current Configuration→ NetworkExcessive Error Rate Threshold Table A-1. Network Interface Options 1 AutoRate DSL Line Rate Possible Settings 400, 528, 784, 1040Table A-1. Network Interface Options 2 Circuit Identifier DSX-1 Interface Options Main Menu→ Configuration→ Current Configuration → DSX-1DSX-1 Interface Options ESF Line Framing Table A-2. DSX-1 Interface Options 1Port Status Line Coding Send All Ones on DSX-1 Failure Table A-2. DSX-1 Interface Options 2Send AIS on Network Failure Primary Clock Source Table A-3. Copy Ports Options Main Menu→ Configuration→ Current Configuration→ Copy PortsCopy Ports Options From Port n System Options Main Menu→ Configuration→ Current Configuration→ SystemSystem Options LTU Table A-4. System Options Management and Communication Menu Telnet Session Options Inactivity Timeout Telnet Login RequiredSession Access Level Table A-5. Telnet Session Options 1 Table A-5. Telnet Session Options 2 Main Menu→ Configuration→ Current Configuration→General Snmp Management Options Disconnect Time Minutes Table A-6. General Snmp Management Options Name 1 AccessName 2 Access Snmp Management Snmp NMS Security Options Snmp NMS Security Options NMS IP Validation Access LevelTable A-7. Snmp NMS Security Options Snmp Trap Options Number of Trap Managers Table A-8. Snmp Trap Options 1Snmp Traps NMS n Destination Enterprise Specific Traps Link Traps Possible Settings Disable, Up, Down, BothTable A-8. Snmp Trap Options 2 Link Traps Interfaces Snmp Traps AuthenticationFailureStandards Compliance for Snmp Traps WarmStart LinkUp and linkDown LinkUp/DownT Variable-Bindings Enterprise-Specific Traps DSL Network IfIndex RFC 50-Pin Connector DSX-1 Port Pinout Function Connector Pin AssignmentsFront Panel 50-pin DTE Connector Pinouts Connector Pin Assignments February Technical Specifications Specifications Criteria Technical Specifications February Bridged tap Glossary511 COM port Ethernet Factory defaultsEIA-530-A Frame 704 Reset703 IP address RS-449 Yellow AlarmRouter Telnet Index IN-1 IN-2 IN-3 IN-4 IN-5 IN-6