Paradyne 8784 manual A-18, Enterprise Specific Traps, SNMP Traps, Link Traps Interfaces

A. Configuration Options

Table A-8. SNMP Trap Options (2 of 2)

Enterprise Specific Traps

Possible Settings: Enable, Disable

Default Setting: Disable

Determines if SNMP traps are generated for enterprise-specific events.

Enable – SNMP traps are generated for enterpriseSpecific events.

NOTE: Refer to Enterprise-Specific Traps in Appendix B, Standards Compliance for

SNMP Traps.

Disable – No enterprise-specific event traps are sent.

Link Traps

Possible Settings: Disable, Up, Down, Both

Default Setting: Both

Determines if SNMP traps are generated for link up and link down for one of the communication interfaces.

Disable – No linkUp or linkDown SNMP traps are generated.

Up – A linkUp trap is generated when the unit recognizes that one of the communication interfaces is operational.

Down – A linkDown trap is generated when the unit recognizes a failure in one of the communication interfaces.

Both – Sends trap messages for detection of both linkUp and linkDown.

NOTE: Refer to linkUp and linkDown in Appendix B, Standards Compliance for SNMP

Traps.

Link Traps Interfaces

Possible Settings: Network, DSX-1, All

Default Setting: All

Determines if the SNMP linkUp, SNMP linkDown, and interface-related enterpriseSpecific traps are generated for the network DSL interface and/or DSX-1 interface (DTE).

Network – SNMP trap messages are generated for the DSL network interface.

DSX-1– SNMP trap messages are generated for the DSX-1 interface.

All – SNMP trap messages are generated for the DSL network interface, COM port, and DSX-1 interface.

A-18 February 2001 8784-A2-GB20-30