Paradyne 8784 manual Current and Default Factory Configurations, If you select, Then

3. Initial Startup and Configuration

Make a selection by placing the cursor at your choice and pressing Enter.

If you select . . .	Then . . .
Current	The selected configuration option set is loaded and the
Configuration	Configuration Edit/Display menu appears. This is the unit’s
	currently active configuration.
Configuration	The Configuration Loader screen is displayed allowing you to
Loader	upload or download configurations from a TFTP server.
Default Factory	The factory-set configuration options are loaded and the
Configuration	Configuration Edit/Display menu appears. This is a read-only
	configuration area.

Current and Default Factory Configurations

The Configuration Edit/Display screen appears when the current or default configuration is loaded. To access the Configuration Edit/Display screen, follow this menu selection sequence:

Main Menu→ Configuration → Current Configuration

– or –

Main Menu→ Configuration → Default Factory Configuration

main/config/edit		Hotwire
Slot: 4		Model: 8784
	CONFIGURATION	EDIT/DISPLAY
	Network
	DSX-1
	Copy Ports
	System Options
	Management	and Communication

-------------------------------------------------------------------------------

Ctrl-a to access these functions, ESC for previous menu	MainMenu Exit
Save

Load Default Factory Configuration to reset the unit’s configuration to its original factory-set configuration to restore access to the ATI when the unit has been misconfigured.

In the menu selection sequences contained in this manual, Current Configuration is assumed and shown.

3-4 February 2001 8784-A2-GB20-30