Paradyne 8784 manual Lamp Test, Main Menu→ Test→ Device Tests

5. Testing

Device Tests

The Device Tests menu lists a single, card-level test, the Lamp Test. To access the Device Tests screen, follow this menu selection sequence:

Main Menu→ Test→ Device Tests

main/test/card		Hotwire
Slot: 4		Model: 8784
	DEVICE TESTS
Test	Command	Status

--------------------------------------------------------------------------------

Lamp Test: Start Inactive

--------------------------------------------------------------------------------

Ctrl-a to access these functions, ESC for previous menu MainMenu Exit

Lamp Test

The Lamp Test determines whether all LEDs are lighting and functioning properly.

Procedure

To test the LEDs:

1.Position the cursor at the Start command next to Lamp Test on the Device Tests screen.

2.Press Enter.

The Start command is changed to Stop. During the Lamp Test, all LEDs blink simultaneously every second. When you stop the Lamp Test, the LEDs are restored to their normal condition.

3.To stop the Lamp Test, position the cursor at the Stop command.

4.Press Enter.

5-8 February 2001 8784-A2-GB20-30