Paradyne 8784 manual Enterprise-Specific Traps

B. Standards Compliance for SNMP Traps

Enterprise-Specific Traps

The enterpriseSpecific trap indicates that an enterprise-specific event has occurred. The Specific-trap field identifies the particular trap that occurred. The following table lists the enterprise-specific traps supported by the unit:

SNMP Trap	Description	Possible Cause
enterpriseSelfTestFail(2)	A hardware failure of the	Failure of one or more of the
	unit is detected during the	unit's hardware components.
	unit's self-test. The trap is
	generated after the unit
	completes initialization.
enterpriseDeviceFail(3)	An internal device failure.	Operating software has
		detected an internal device
		failure.
enterpriseTestStart(5)	A test is running.	At least one test has been
		started on an interface.
enterpriseConfigChange(6)	The configuration changed	Configuration has been
	via the user interface. The	changed via the ATI.
	trap is sent after
	60 seconds have elapsed
	without another change.
	This suppresses the
	sending of numerous traps
	when multiple changes are
	made in a short period of
	time, as is typically the case
	when changing
	configuration options.
enterpriseTestStop(105)	All tests have been halted.	All tests have been halted on
		an interface.

There are no variable-bindings for enterpriseDeviceFail and enterpriseConfigChange. The variable-binding for enterpriseSelfTestFail is devSelfTestResults.

8784-A2-GB20-30 February 2001 B-3