Paradyne 8784 manual Saving Configuration Changes, Procedure

3. Initial Startup and Configuration

Saving Configuration Changes

When changes are made to the configuration options through the Configuration Edit/Display menu, the changes must be saved to take effect. Use the Save function key to go to the Save Configuration screen.

main/config/saveprompt	Hotwire
Slot: 4	Model: 8784
SAVE	CONFIGURATION
Save	Changes? No
	WARNING:
An answer of “yes” will cause the system
to reset as if it	had been powered off and on!

-------------------------------------------------------------------------------

Ctrl-a to access	these functions, ESC for previous menu	MainMenu Exit
Command Complete

Procedure

To save configuration options changes:

1.Press Ctrl-a to switch to the function keys area below the dotted line.

2.Select Save and press Enter.

If the Telnet Session configuration option is changed, a message displays on the Save Configuration screen warning that an answer of Yes will cause the Telnet session to disconnect. Do not answer Yes unless you are prepared to disconnect.

If the DSL Mode configuration option is changed, the Save Configuration screen bears the warning that an answer of Yes will cause the system to reset. Do not answer Yes unless you are prepared to reset the unit.

NOTE:

When Exit is selected before Save, or Save has been selected from any Configuration/Edit menu, a Save Configuration screen appears that requires a Yes or No response. If you select:

—Yes, the configuration is saved.

—No, the Main Menu reappears and changes are not saved.

8784-A2-GB20-30 February 2001 3-7