Write Environment | Command Dictionary |
|
|
The following listing shows the contents of an example Write Environment command:
Abort Limit = (backtrack=30, cycle=300, time=300 seconds) ATPG Limit = (cpu_seconds=off, cycle_count=off, test_coverage=off)
Capture Clock (ATPG) = none Capture Limit = off Checkpoint = off Checkpoint File = NULL Clock Restriction = on
Contention Check = (bus=(0,noatpg,warning), port=off) Dofile Abort = on
Fault Mode = uncollapsed Fault Sampling = 100% Fault Type = stuck_at Gate Level = design Gate Report = normal Hypertrophic Limit = 30%
Iddq Checks = none, noatpg, warning Iddq Strobe = label
Identification Model = (clock=original, disturb=on) Internal Faults = on
Internal Name = off List File = list1 Logfile Handling = Loop Handling = hold Net Dominance = wire Net Resolution = wire Nonscan Model = drc Output Comparison = off Output Mask = off Pattern Source = internal
Pin Constraints (default) = type NR, period 1, offset 0 Pin Strobes (default) = 0
Possible Credit = 50% Pulse Generators = on Race Value = old Random ATPG = on
Rundundancy Identification = on
Scan Identification = automatic Onternal Full backtrack=30 cycle=16 time=100
Screen Display = on
FastScan and FlexTest Reference Manual, V8.6_4 |
