Command Dictionary | Report Primary Outputs |
|
|
Report Primary Outputs
Tools Supported: FastScan and FlexTest
Scope: All modes
Usage
REPort PRimary Outputs
Description
Displays the specified primary outputs.
The Report Primary Outputs command displays a list of primary outputs of a circuit. You can choose to display either the user class, system class, or full classes of primary outputs. Additionally, you can display all the primary outputs or a specific list of primary outputs. If you issue the command without specifying any arguments, then the tool displays all the primary outputs.
Arguments
∙
An optional switch that displays all primary outputs. This is the default.
∙net_pathname
An optional repeatable string that specifies the circuit connections whose user- class primary outputs you want to display.
∙primary_output_pin
An optional repeatable string that specifies a list of
∙
An optional switch and literal pair that specifies the source (or class) of the primary input pins which you want to display. The literal choices are as follows:
Full — A literal that displays all the primary input pins in the user and system class. This is the default.
FastScan and FlexTest Reference Manual, V8.6_4 |