Mentor v8.6_4 manual Figure A-9. SET Measure Timing Example

SET MEASURE TIME Timing Command Dictionary

Figure A-9shows when the output pin measures occur based on this example.

0NS			Measure times (for test cycle 1)			150NS
				65NS
	15NS	38NS			135NS

cycle starts cycle ends

Figure A-9. SET MEASURE Timing Example

You could use these measure times in conjunction with the force times specified in the SET FORCE TIME example. In the first 150ns test cycle, the measure times occur at 15, 38, 65, and 135ns. In the second test cycle, the measure times occur at 150 plus the specified offsets; that is, 165, 188, 215, and 285ns.

Related Commands
SET END_MEASURE_CYCLE	SET PROCEDURE FILE
TIME
SET SPLIT_BIDI_CYCLE TIME

A-46 FastScan and FlexTest Reference Manual, V8.6_4