FastScan and FlexTest Reference Manual, V8.6_4 2-1
Chapter 2Command Dictionary
This chapter contains descriptions of the FastScan, FlexTest, and DFTInsight
commands. The subsections are named for the command they describe. For quick
reference, the commands appear alphabetically with each beginning on a separate
page.

Command Summary

Table 2-1 contains a summary of the commands described in this manual. The
three columns that separate the command name and the description indicate the
tools in which you can use the commands. The following tool acronyms are used
in the table:
DFTI DFTInsight FS FastScan FT FlexTest
Table 2-1. Command Summary
Command
D
F
T
IF
SF
TDescription
Abort Interrupted
Process •Aborts a command placed in suspended state
by a Control-C interrupt while the Set
Interrupt Handling command is on.
Add Ambiguous Paths •Specifies for FastScan to select multiple paths
when there is path ambiguity.
Add Atpg Constraints ••Specifies that the tool restrict all patterns it
places into the internal pattern set according
to the user-defined constraints.