Mentor v8.6_4 manual Command Summary

Command SummaryCommand Dictionary

Table 2-1. Command Summary [continued]

	D
	F
	T	F	F
Command	I	S	T	Description
Report Flatten Rules	∙	∙	∙	Displays either a summary of all the flattening
				rule violations or the data for a specific
				violation.
Report Gates		∙	∙	Displays the netlist information for the
				specified gates.
Report Hosts			∙	Displays information on the hosts available
				for distributed processing.
Report Id Stamp		∙		Displays the unique identifier that FastScan
				assigns each internal pattern set.
Report Iddq Constraints		∙	∙	Displays the current IDDQ constraints for the
				specified pins.
Report Initial States			∙	Displays the initial state settings of the
				specified design instances.
Report LFSR		∙		Displays a list of all the connections between
Connections				Linear Feedback Shift Registers (LFSRs) and
				primary pins.
Report LFSRs		∙		Displays a list of definitions for all the current
				Linear Feedback Shift Registers (LFSRs).
Report Lists		∙	∙	Displays a list of pins which the tool reports
				on while in the Fault or Good simulation
				system mode.
Report Loops		∙	∙	Displays a list of all the current loops.
Report Mos Direction		∙	∙	Reports the direction MOS instances in the
				Spice design and Spice SUBCKT library.
Report Net Properties		∙	∙	Reports the VDD or GND net properties in
				the Spice design and library.

2-12 FastScan and FlexTest Reference Manual, V8.6_4