FastScan and FlexTest Reference Manual, V8.6_4
2-2
Command Summary Command Dictionary
Add Atpg Functions ••Creates an ATPG function that you can then
use when generating user-defined ATPG
constraints.
Add Capture Handling •Specifies the data capturing behavior for the
given state element.
Add Cell Constraints ••Constrains scan cells to be at a constant value.
Add Cell Library ••Specifies the EDIF library in which to place
all or specified library models.
Add Clocks ••Adds clock primary inputs to the clock list.
Add Cone Blocks ••Specifies the blockage points that you want
the tool to use during the calculation of the
clock and effect cones.
Add Control Points •Adds control points to output pins.
Add Display Instances •••Adds the specified instances to the netlist for
display.
Add Display Loop •••Displays all the gates in a specified feedback
path.
Add Display Path •••Displays all the gates associated with the
specified path.
Add Display Scanpath •••Displays all the associated gates between two
positions in a scan chain.
Add Faults ••Adds faults into the current fault list.
Add Iddq Constraints ••Sets constraints for generation or selection of
IDDQ patterns.
Table 2-1. Command Summary [continued]
Command
D
F
T
IF
SF
TDescription