Mentor v8.6_4 manual 471

Command Dictionary Set Drc Handling

T22 —If the rules checker traces a scan cell during the application of an independent shift, it must also trace that cell during the application of its associated general shift.

T23 —The chain length calculated for an independent shift must be the same as that calculated for its associated general shift.

∙Error

An optional literal that specifies for the tool to both display the error occurrence message and immediately terminate the rules checking.

If you do not specify the Error, Warning, Note, or Ignore option, then the handling is either set to the previous handling or set to the Design Rules Checker default.

∙Warning

An optional literal that specifies for the tool to display the warning summary message indicating the number of violations for that rule. If you also specify the Verbose option, the tool displays the occurrence message for each occurrence of the rules violation.

If you do not specify the Error, Warning, Note, or Ignore option, then the handling is either set to the previous handling or set to the Design Rules Checker default.

∙NOTe

An optional literal that specifies for the tool to display the summary message indicating the number of violations for that rule. If you also specify the Verbose option, the tool also displays the occurrence message for each occurrence of the rules violation

If you do not specify the Error, Warning, Note, or Ignore option, then the handling is either set to the previous handling or set to the Design Rules Checker default.

∙Ignore

An optional literal that specifies for the tool not to display any message for the rule’s violations. The tool must still check some rules and they must pass to allow later performance of certain functions.

FastScan and FlexTest Reference Manual, V8.6_4 2-471