Mentor v8.6_4 manual Appendix a Timing Command Dictionary, FS = FastScan

Appendix A Timing Command Dictionary

This appendix contains descriptions of FastScan and FlexTest timing file commands. Each tool’s commands appear in separate sections.

∙“FastScan Timing Commands” on page A-3describes the FastScan timing commands.

∙“FlexTest Timing Commands” on page A-32describes the FlexTest timing commands.

The “ Timing Command Summary” section, which follows, presents a summary of all the timing commands for both applications.

For information on the methods FastScan and FlexTest use for defining test pattern timing and performing timing rules checking, refer to “ Test Pattern Formatting and Timing” in the Scan and ATPG Process Guide.

Timing Command Summary

Table A-1contains a summary of all the timing commands described in this appendix.

The two columns that separate the command name and the description indicate which tools support the timing command. The table uses the following tool acronyms:

FS = FastScan FT = FlexTest

FastScan and FlexTest Reference Manual, V8.6_4 A-1