Mentor v8.6_4 manual Table A-1. Timing Command Summary

Timing Command Summary Timing Command Dictionary

Table A-1. Timing Command Summary

	F	F
Command/Statement	S	T	Description
SET BIDI_FORCE TIME		∙	Sets bidirectional pin force time for each
			timeframe.
SET CYCLE		∙	Extends the non-scan cycle duration to
			ensure stability without adding extra
			timeframes.
SET	∙	∙	Ensures that the primary output measure is
END_MEASURE_CYCLE			the last event of the test cycle and moves
TIME			the measure_sco event to the end of the
			previous test cycle. This command cannot
			be used with patterns containing a capture
			clock. Use the Set Split_measure_cycle
			Time command for patterns that contain a
			capture clock.
SET FIRST_FORCE TIME		∙	Sets input pin force time for the first
			timeframe.
SET FORCE TIME		∙	Sets input pin force time for each
			timeframe.
SET MEASURE TIME		∙	Sets output pin measure time for each
			timeframe.
SET PROCEDURE FILE	∙	∙	Specifies which test procedure files to use
			during pattern save.
SET SINGLE_CYCLE TIME	∙	∙	Enables timing rules checking to ensure a
			single time exists for both scan and non-
			scan test cycles.
SET SKEW_FORCE TIME		∙	Specifies input pin force time for particular
			pins in each timeframe.

A-2 FastScan and FlexTest Reference Manual, V8.6_4